Why is my lid not closing? Why doesn't my lid fit?

If your Lomi lid isn't closing, there's an easy fix!

One possible issue is that the notches on the metal gear inside Lomi, and on the bottom of the bucket, are not aligning properly. This causes the bucket to be pushed up just enough to prevent the lid from locking.


To fix this:

1. Remove the bucket from Lomi and ensure that the contents of Lomi are completely emptied from the bucket
2. Place the empty bucket into Lomi, lining up the arrows.
3. Slightly lift the bucket until you hear a click.
4. GENTLY push counterclockwise on the grinder in Lomi.
At this step, you should notice that the bucket is being pushed up ever so slightly. This is due to the coupling on the bottom of the bucket realigning with its counterpart component below it.
5. Once the bucket has been realigned, you should be able to place the lid back onto Lomi and lock it in place without resistance.

If you come up against resistance, please do not continue trying to lock the lid as you may risk damaging the tabs on the lid. Alternatively, you can try turning the coupling component on the bottom of Lomi to realign.


Articles in this section

Was this article helpful?
30 out of 55 found this helpful



Article is closed for comments.