My Bucket Doesn't Fit Inside Lomi - What do I do?

Luckily, this is an easy fix! It could be that the notches on the metal coupling inside Lomi and on the bottom of the bucket are not aligning properly. 

Please follow the directions in the video and/or review the troubleshooting steps outlined below the video.

Troubleshooting Steps

1. Remove bucket from Lomi and ensure that the contents of Lomi are completely emptied from the bucket
2. Place the empty bucket into Lomi, lining up the arrows.
3. Slightly lift the bucket until you hear a click.
4. GENTLY push counter-clockwise on the grinder in Lomi.
At this step you should notice that the bucket is being pushed up ever so slightly. This is due to the coupling on the bottom of the bucket realigning with its counterpart component below it.
5. Once the bucket has been realigned, you should be able to place the lid back onto Lomi and lock it in place without resistance.

If you come up against resistance, please do not continue trying to lock the lid as you may risk damaging the tabs on the lid.


If you continue to experience this issue after following the above steps, please contact our customer service agents at and we will assist you.

Articles in this section

Was this article helpful?
22 out of 37 found this helpful



Article is closed for comments.